Switch Panels & Accessories

BEP Contour Heavy Duty Battery Master Switch The 720 heavy duty Contour Master Switch is designed for larger vessels with higher amp loads. It offers 600 amps continuous and 2500 amps cranking capacity. The switch can be recess mounted in a 85mm hole or...

BEP Contour Heavy Duty Distribution Buss The Contour Distribution Buss allows multiple terminations of heavy duty negative or positive connections. Removable side plates allow for connections from all sides. Designed to match all other Contour power...

BEP Contour Interior Switches Replicating the same lines as the Contour Switch Panels and Meters, these interior switches compliment the decor of modern boat interiors. The Contour switch can be either, surface or recessed, vertical or horizontal...

BEP Contour Power Stud Cover 113524 BEP Contour Power Stud Cover Contour style, moulded grey plastic cover to suit single or dual insulated power studs. Designed to match all other Marinco BEP Contour power distribution products with modular sizing and...

BEP Dcm Panel Conversion And Meter Only - 600 Dcsm Kit - Meter Only + Panel Conversion For Old Dcm To Dcsm 113383 BEP DC Systems Monitor (DCSM) ACcessories Marinco BEP DC Systems Monitor (DCSM) ACcessories: - Meter only - 600 DCSM kit meter only + panel...

BEP Digital Voltage Sensing Relay Dual Battery Charging Made EasyThe Digital Voltage Sensing Relay (DVSR) allows the charging of a second battery bank from any single charging source. When the voltage on the charged bank rises sufficiently, the DVSR...

BEP Distribution Stud, Secondary Buss 113562 BEP Distribution Stud, Secondary Buss Fitted to a distribution stud, it allows for small wire connections without cluttering main stud. Tinned brass construction.

BEP Contour Heavy Duty Battery Master Switch Designed to isolate both positive and negative circuits as required in some commercial vessel installations. It is not recommended for switching house and start battery systems at the same time for safety...

BEP Easyfit Battery Master Switch Through panel mount battery master switch with removable threaded ring allows for fast installation in panel thicknesses up to 19mm. Control knob cannot be removed whilst in the on or off position, but is removable at...

BEP Flexible Terminal Links Used to link contour power distribution modules in some installations where the solid links do not suit or will not reach the correct terminal.   Part Number Wire mm2 Centre...

BEP Fuse Battery Terminal Mount Rating: 100 Amps 114126 BEP Terminal Mount Fuse Holder and Fuses Simply mounted to a 3/8” battery post, battery switch or bus bar the holder utilizes space saving ignition protected fuses for DC systems of 80 to...

BEP Heavy Duty Blade Fuse And Holder 60 Amp Fuse Only 113629 BEP Heavy Duty Blade Fuse and Holder In-line heavy duty fuse holder for installations where space is limited. Supplied with 8mm² wire tails. Fuses are sold separately. Fuse holder is...

BEP Heavy Duty Blade Fuse And Holder Fuse Holder Only 113621 BEP Heavy Duty Blade Fuse and Holder In-line heavy duty fuse holder for installations where space is limited. Supplied with 8mm² wire tails. Fuses are sold separately. Fuse holder is...

BEP Heavy Duty Busbar 113503 BEP Twin Busbars with Cover - Packaged Tin plated brass busbars with twin rows of six terminals each and insulated mounting bases to enable both positive and negative DC, or earth and neutral buses on one block...

BEP Heavy Duty Circuit Breakers Panel Mount 114061 BEP Heavy Duty Circuit Breakers These heavy circuit breakers are designed for DC power systems to 48 volt where reliability and functionality for both switching and circuit protection is essential...

BEP Insulated Dual Power Studs High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for isolated positive and negative connections. A version with 10mm stud for the positive cable and...

BEP Insulated Dual Power Studs With Covers Packaged 113489 Marinco BEP Insulated Dual Power Studs with Covers – Packaged High temperature moulded plastic base with tinned copper studs in 8 to 10mm and tinned brass in 6mm version. Commonly used for...

BEP Insulated Power Stud - Black High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards...

BEP Insulated Power Stud - Red High temperature moulded plastic base, colour coded for polarity. Studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit covers are available to protect exposed lugs, conforming to ABYC standards...

BEP Insulated Power Studs With Covers - Packaged 113483 BEP Insulated Power Studs with Covers - Packaged High temperature moulded plastic base, colour coded for polarity studs are tinned copper in 10mm and tinned brass in 6mm versions. Push fit colour...

BEP IP65 Enclosure Suits MCD & RCD Circuit Breaker To comply with AS/NZ3004 standard an approved double pole mains circuit breaker must be mounted upstream of an A/C control panel powered either by shore power or a genset. This can be in the form of...

BEP Label Set BEP Cg2 Panels Black adhesive labels with white lettering to suit BEP Contour Generation 2 splash proof switch panels. SET-1 part # 113694 AERATOR, ANCHOR LT, BAIT TANK, BILGE PUMP, AUTO B/P MAN, BLOWER, CABIN LIGHTS, COCKPIT LTS, DC...

BEP Label Set BEP Cg2 Panels Black adhesive labels with white lettering to suit BEP Contour Generation 2 splash proof switch panels. SET-1 part # 113694 AERATOR, ANCHOR LT, BAIT TANK, BILGE PUMP, AUTO B/P MAN, BLOWER, CABIN LIGHTS, COCKPIT LTS, DC...

BEP Label Set-1 Sp Oval BEP Csp6 Panels 113702 Black adhesive labels with white lettering to suit Marinco BEP splash proof panels 113240-113254. Oval shaped, 26 x 9mm -  113714 Accessories, Aerator, Anchor Lights, Autopilot, Bait Tank Pump,...

BEP Label Set-2Sp Oval BEP Csp6 Panels 113703 Black adhesive labels with white lettering to suit Marinco BEP splash proof panels 113240-113254. Oval shaped, 26 x 9mm - 113714-BLA Accessories, Aerator, Anchor Lights, Autopilot, Bait Tank Pump, Bilge...

BEP Maxi Fuse Holder 113510 BEP Maxi Fuse Holder The expandable ATC negative Busbar uses the Marinco BEP Contour Lock system to allow it to be joined to the ATC fuse holder. This keeps wiring tidy and conveniently located. Current rating 100A.

BEP Micro Modular Switch Panels  The micro range of switches offer the unique ability to select the size and orientation of switch panels by adding the compact modules together horizontally or vertically. Injection moulded plastic panel with high...

BEP Mini Four Position Battery Switch The 701-S is the smallest selector switch on the market. This battery switch offers a simple and economical way of separating two batteries. Four position rotating switch provides off, Battery 1, Both and Battery 2...

BEP Momentary Switch Panel mounted momentary toggle switch to activate the emergency parallel function of the remote operated VSRs.   Part Number Suits 113545 113672, 114080, 113680

BEP Nameplates For Circuit Identification 113714 Marinco BEP Nameplates for Circuit Identification Black adhesive labels with white lettering to suit Marinco BEP splash proof panels 113240-113254. Oval shaped, 26 x 9mm.

BEP Nameplates for Circuit Identification Set 1  Black adhesive labels with white lettering to suit BEP Contour, Contour AC, Cruiser and Millennium Breaker Panels.   Accessories Anchor Light Auto Pilot Bilge Pump Cabin Lights ...

BEP Nameplates For Circuit Identification - Set 10  Black adhesive labels with white lettering to suit B E P Contour, Contour A C, Cruiser and Millennium Breaker Panels. Air Compressor Air Con Galley Air Con Guest Room Air Con Master State...

BEP Nameplates For Circuit Identification - Set 12 Black adhesive labels with white lettering to suit B E P Contour, Contour A C, Cruiser and Millennium Breaker Panels. 12-24 V Reducer  Aerator  Ballast Aft  Ballast Control ...

BEP Nameplates For Circuit Identification - Set 13 Black adhesive labels with white lettering to suit B E P Contour, Contour A C, Cruiser and Millennium Breaker Panels. Aft Bilge Alarm Bilge Alarm Bilge Alarm Test Bilge Auto Bilge Lights ...

BEP Nameplates For Circuit Identification - Set 14 Black adhesive labels with white lettering to suit B E P Contour, Contour A C, Cruiser and Millennium Breaker Panels.  210KHz TX 33KHz TX Aft Hold Light Cockpit Freezer Engine Controls...

BEP Nameplates For Circuit Identification - Set 15 Black adhesive labels with white lettering to suit B E P Contour, Contour A C, Cruiser and Millennium Breaker Panels. 12v Outlet Flybridge Arch Lights Bilge Pump Clutch Cabin Heater Compass...

BEP Nameplates For Circuit Identification - Set 16 Black adhesive labels with white lettering to suit B E P Contour, Contour A C, Cruiser and Millennium Breaker Panels. AC Outlets Aft AC Outlets Aft Cabin AC Outlets Cockpit AC Outlets Deck A C...

BEP Nameplates For Circuit Identification - Set 17  Black adhesive labels with white lettering to suit B E P Contour, Contour A C, Cruiser and Millennium Breaker Panels. 24 Hour Circuits Aft Bilge Pump Auto / Man Aft Head Alarm Mute ...

BEP Nameplates For Circuit Identification - Set 18 113741 Black adhesive labels with white lettering to suit B E P Contour, Contour A C, Cruiser and Millennium Breaker Panels. 27 Meg Aft Holding Tank Aft Water Heater Cabin Outlets Cockpit...

BEP Nameplates For Circuit Identification - Set 19 Black adhesive labels with white lettering to suit B E P Contour, Contour A C, Cruiser and Millennium Breaker Panels. 12V Battery Charger 24 hour Bilge Pump 24V Battery Charger Bilge Pump Port...