Boomer Anchor

What Will You Receive?

In your Boomer Easy Freight Starter Pack you will receive 1 Boomer Anchor- 4.7kgs consisting of :

• 1 x molded main body (electropolished 316 SS)
• 4 x high penetration surface selection prongs (electropolished 316 SS) – 2 wide angle + 2 narrow angle
• 1 x inner shaft (electropolished 316 SS)
• 4  sets of 8mm x 35mm bolts and nylock nuts (304 SS)
• 10 x 3mm zinc coated threaded bolt and nut shear-pins
• 10 x 4mm zinc coated threaded bolt and nut shear-pins
• 10 X 5mm zinc coated threaded bolt and nut shear pins (boat size dependent)
• 1 x set of simple Assembly and "How to" instructions

The Boomer Features

• "Lifetime"premium high quality boat accessory
• Molded Combination electropolished 316 Stainless Steel
• Simple, lightweight design, relying on engineering instead of weight for performance - only 4.7 kgs.
•  "No plastic zip-ties"  or cord left behind just a small section of sheared pin which breaks down to nothing in time
• "Drive Forward" Easy Release "Wide Shoulder" design to aid in stress-free release from the seabed
• The wedge shaped points reduce the chance of jamming in underwater crevices
• Patent Pending (Measurable Controlled Release) collapsible retrieval design for additional safety.
• 3 anchors in 1 - Reef and Sand mode or simple adjustment to Mud mode
• Overbalance design for excellent self-deployment
• Excellent storage features

Boomer Versatility

This is the best anchor for the majority of your boating activities. It is a convenient, light, strong, reef anchor that holds aggressively and releases safely.

 It has excellent holding capabilities in reef, shale, sand and mud (*). 

(*)"Holding capabilities start to reduce for boats over 6 metres in soft mud conditions" Not recommended for overnight anchoring in mud.

'Reduces the requirement to change anchors for varying seabeds during the day. However, for over-night use, always anchor to the conditions, If in doubt about adverse weather, drop down a big heavy over-sized anchor. Due to the variance in seabeds and different weights of boats within this range, this is only a guide.

Safety is your responsibility. We recommend you always set and test the holding capabilities of your anchor to assess your personal mooring safety.

Mooring Capability Guide

"Measurable Controlled Release"  shear pin recommendations:

A pack of suitable pins is supplied with your purchase. This should give you months to years of boating enjoyment before you need to re-stock. The zinc/nickel coated bolts are standard sizes you will find in most local hardware stores. (*) Tensile strength in similar size bolts can vary

We strongly urge you to use the recommended pins. Do not use stainless steel, nails or any hardened material which defeats the purpose of the Boomer. A hard material may not shear and damage the Boomer or your boat.

If you have any concerns about pins, we stock bulk purchases of these items for your convenience.

* Boating is an immensely pleasurable activity, however there are risks associated.

*Boomer Anchors takes no responsibility for any adverse results due to your actions whilst using this device.