Description
Rule-Mate fully automatic submersible bilge pumps with Rule'sA exclusive "Spongeability" feature. A All-in-one bilge pump & switch so no float switch required. The innovative design incorporates the bilge pump and water sensorA in a single housing. Unique Rule "Spongeability" feature leaves the bilge the driest ever -A when water in the bilge reaches a certain height the solid state sensorA automatically activates and the pump runs until the water is pumped out,A reducing boat weight, saving fuel and minimizing bilge odour. Pump check feature - simply touch the pump check button on the pumpA and hold for a few seconds to test cycle the pump. A These pumps have a threaded discharge port with O ring seal and areA supplied with both 90 degree and straight hose ports - 20mm for 500 & 750A GPH - 28mm for 1100 GPH model. Available in 12 volt or 24 volt (1100 GPH only). 3 year limited warranty. Fully automatic all-in-one submersible bilge pump systemsNo separate float switch requiredBilge water sensor and pump in one common housingPump and sensor are internally common wired for easy installationNo battery drain other than when the pump is in useRemovable strainer and impeller area are accessible to clear debrisThreaded discharge ports for easy installation1 each straight and 90 degree hose ports supplied with the pumpA 3rd wire allows for manual over-ride using a Rule switch panel or it can activate an alarm or indicator lamp if desiredThermal overload protectionSingle touch pump check test button feature3 different capacities 500 - 750 - 1100 gallons per hourAll pumps are oval shaped - base footprint size : 110mm x 70mm. Overall dimensions Inc straight hose port : 190mm L x 80mm W x 115mm HPart NumberCapacityPower SupplyCurrentHose OutletsRWB824750 GPH (50A LPM)A 12V2. 7A Amps20mm (3/4")RWB8261100 GPH (69A LPM)A 12VA 3. 4A Amps28mm (1-1/8")RWB8271100 GPH (69A LPM)A 24V1. 7 Amps28mm (1-1/8")
