Rule-Mate Automatic Bilge Pump 2000 GPH

Rule-Mate fully automatic submersible bilge pumps with Rule’s exclusive “Spongeability” feature. The new innovative design incorporates the bilge pump and water sensor in a single housing. The unique Rule “Spongeability” feature leaves the bilge the driest ever  – when water in the bilge reaches a certain height the sensor automatically activates and the pump runs until water is pumped out. reducing boat weight, saving fuel and minimising bilge odour.

When the float switch drops and the pump senses no load against the impeller, the shut-off phase begins. At that point, the pump will run an additional 15 seconds allowing the pump to take the bilge water level down by an additional 10mm. Heavy Duty Rule motors, supplied with 16 gauge extra long 120mm wiring.

• Fully automatic submersible bilge pump systems.
• Non-mercury float switch and pump in a common housing.
• No cycling – 2-second delayed action – eliminating any false starts
• No battery drain other than when the pump is in use.
• The removable strainer and impeller area are accessible to clear debris.
• Threaded ports for easy installation. Straight and 90 deg included.
• The pump and switch are internally wired for easy installation.
• A 3rd wire allows for manual override using Rule switch panel or it can activate an alarm or indicator lamp.
• Thermal overload protection..
• 3 Limited Warranty