Rule 1100 GPH Rule-Mate Automatic Bilge Pump - 12 volt

All-in-one bilge pump & switch - no float switch required.

The innovative design incorporates the bilge pump and water sensor in a single housing. Unique Rule 'Spongeability' feature leaves the bilge the driest ever - when water in bilge reaches certain height the solid state sensor automatically activates and the pump runs until the water is pumped out, reducing boat weight, saving on fuel and minimising bilge odour.

Pump check feature - simply touch the pump check button on the pump and hold for a few seconds to test cycle of the pump.

These pumps have a threaded discharge port with O ring seal and are supplied with both 90 degree and straight hose ports - 200mm for 500 & 750 GPH - 28mm for 1100 GPH model.

Available in 12 volt or 24 volt (1100 only).

3 year limited warranty.

• Fully automatic all-in-one submersible bilge pump systems¨
• No separate float switch required
• Bilge water sensor and pump in one common housing
• Pump and sensor are internally common wired for easy installation
• ¨No battery drain other than when pump is in use
• Removable strainer and impeller area are accessible to clear debris
• Threaded ports for easy installation
• Straight and 90 degree hose ports supplied with the pump
• 3rd wire allows for manual over-ride using Rule switch or it can activate an alarm or indicator lamp
• Thermal overload protection
• Single touch test button feature
• 3 different capacities 500/750/1100 gallons per hour

All pumps are oval shaped - base footprint size : 110mm x 70mm

Overall dimensions Inc threaded hose port : 190mm L x 80mm W x 115mm H

Spare Parts/Replacements:

RWBSP562 - Replacement snap-on strainer base

RWB5180 - Spare hose barb straight 20mm

RWB5181- Spare hose barb 90 degree 20mm

RWB5182 - Spare hose barb straight 28mm

RWB5183 - Spare hose barb 90 degree 28mm