Launch & Retrieve Roller Extender Option

Used where the roller needs to be able to project out further to the bow.

More commonly required on Towing Eye (Aluminium) boats.  

The roller should act as a ‘bumper’ and works well where it wedges between the bow and the towing eye, helping to keep the boat from moving up & down on the trailer when being towed.

The option is comprised of two 6 mm plates and you will need six ½ “ bolts 1” long (M12 x 25 mm) galvanised bolts with washers and nylon locking nuts.

Adjustment ability There are 4 adjustment horizontal positions.

The bolts locate in one of these and the other pair of bolts go in slotted holes, allowing the roller/wedge to swing up/down for vertical adjustment.

This can project out 43 to 91 mm. (1. 7 to 3. 6 “) The 2 lower bolts are fixed so that the bolt or nut heads are located against the vertical Roller supports of the winch platform, limiting movement.