Description
This Patent Pending mount is CNC Machined from 1.0″ thick 6061-T6 aluminium. Additionally, it is Type III Hard Coat Anodized per MIL-A-8625 and comes with a lifetime warranty*. This model rotates fully with 4 locking positions at 0, 30, 60 and 90 degrees to allow you to pivot or swivel the motor into position. Fully compatible with your Minn Kota, Garmin, Rhodan, Power-Pole, Motorguide or any other trolling motor with up to 120 inch shaft length. If you want to use your standard quick release mount such as RTA-17, MKA-21, RTA-54, RTA-62, MKA-64, RTA-55, MKA-56, or Garmin versions, we have those hole patterns included already so you are all set! Quest series motors require QST-1 expander plate so please add that to your cart when ordering for those motors. With a built in, simple to use detent mechanism, simply pull the large pin and rotate the motor so the shaft clears the rub rail. Easy! The SS-9.5R is the most robust rotating mounting system available today.
Why choose SS-9.5R over the SS-7.5R? (Short Video)
- You want to reduce the amount of pressure on your deck (clear deck space required for a 9.5″ diameter circle)
Why choose a rotating mount?
- You have limited space to attach a trolling motor
- You want the trolling motor to sit off to the side and sit along the gunwale
- You want a clear view of the bow without the trolling motor obstructing your field of view
- ALL SS-9.5R mounts require 6 holes in your deck for proper attachment with first bolt within approximately 13 inches from edge of rub rail
- Uses all 3/8″ 316 Stainless hardware
- Optional Backing plate BKP-9.5R recommended if your have concerns about your deck
Product overview
- Designed to be used with the following mount systems or trolling motors with shaft lengths up to 108 inches
- Minn Kota (Quest series included**): Instinct, Ulterra, Terrova, Powerdrive, Riptide Ulterra, Riptide Terrova, Riptide Powerdrive, Riptide SP/ST, PD/HC Pontoon and DH40
- Garmin Force Kraken
- Rhodan (all models)
- Power-Pole Move PV (Offshore model supported!)
- MotorGuide: Xi5 and Xi3
- Lowrance/Simrad Recon
- RTA-17, MKA-21, RTA-54, RTA-62, MKA-64, RTA-55**, MKA-56** Quick Release mounts
- JM55007 (RTA-17 / MKA-21 clone) Quick Release mounts
- Many other brands that share the same bolt patterns as above
Dimensions
-
- Deck Plate footprint: 9.5″ Diameter
- Center of rotation: Approximately 3.5 inches behind rear of motor
- Center of rotation to edge of trolling motor shaft: Approximately 17.25 to 18.25 inches
- Rotation Pin: 4.5″ Diameter
- Detent Pin: 10mm Diameter (Over 6,000 lb shear rating)
- Travel: 360 degrees, 4 detents at 0, 30, 60 and 90
- Trolling motor mounted height: ~1.50 inches from mounting surface (Boat deck typically)
- Bottom of rotating plate to deck: Approximately 0.675 inches
- Rated motor weight (NOT thrust): 120 lbs
- Rated shaft length: UP TO 120 inches
- Installation Instructions (Preliminary!)
- Warranty: Lifetime*
