Description
Blue Sea e-Series On Off Battery Isolator Switch
Switches a single battery to a single load group
- Ignition protected—safe for installation aboard gasoline powered boats
- Case design allows surface or rear panel mounting
- Meets American Boat and Yacht Council (ABYC) requirements for battery switches
- 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance accepts 3/8" and M10 ring terminals
- 7/8" (22.22mm) stud length to accept multiple cable terminals
- Tactile textures indicate knob position by feel only
##Specifications##
| Switch Type | Single Circuit On/Off |
|---|---|
| Switch Family | e-Series |
| Switch Colour | Red |
| Function | Switches a single battery to a single load group |
| Battery Inputs | 1 |
| Switch Positions | 2 |
| Battery Combine | N/A |
| Make Before Break | N/A |
| Alternator Field Disconnect | No |
| Maximum Voltage | 48VDC |
| Continuous Rating | 350A |
| Intermittent Rating | 600A |
| Cranking Rating (30 Sec) | 1200A |
| Stud Material | Tinned Copper |
| Stud Size | 3/8" (M10) |
| Stud Torque | 140 in-lb (15.82Nm) |
| Cable Size to Meet Ratings* | 4/0 AWG (120 mm²) |
| IP Rating | IP66 |
| Weight | 1.30lb (0.59 kg) |
*Reducing cable size will reduce current rating
Switch set to ON
##Specifications##
