Description
Norglass Microtalc
Norglass Microtalc is a microfined white powder used as an extender with epoxy and polyester resins. It provides a smooth, workable consistency and improves filler properties for a range of applications.
## Features##
Features
• Microfined white powder for epoxy and polyester resins.
• Provides a flat finish.
• Improves workability and consistency.
• Non-hazardous when used with protective equipment.
• Easy to mix and apply.
• Clean-up with Norglass Epoxy Thinner.
| Available Sizes |
| 500g |
| 1kg |
| 5kg |
Mixing Ratio
Discretionary – usually 1:1 by volume with resin. Adjust quantity until desired consistency is achieved.
Application
Pour the epoxy resin base into a plastic pail, add the appropriate hardener (fast or slow), and blend thoroughly. Slowly incorporate Microtalc, starting with approximately 50% of the mixed resin volume, and add more as needed. Apply with a trowel, squeegee, or flat-bladed knife onto prepared surfaces.
Clean Up
Norglass Epoxy Thinner
Precautions
Wear gloves, goggles, and a mask when mixing. Avoid inhaling dust. In case of eye contact, flush with water for at least 15 minutes. For skin contact, wash thoroughly. If swallowed, do not induce vomiting; drink water or milk. Ensure good ventilation during application.
## Features##
