Description
Norglass Norshield Anti-Corrosive Primer
Norglass Norshield Anti-Corrosive Primer is a dense red oxide, 2-pack epoxy primer designed for metal surfaces. Containing leafing pigments, it provides excellent protection against corrosion. Ideal for ferrous metals, areas of continuous immersion, and high-rise structures, this primer ensures long-lasting durability and adhesion.
## Features##
Features
• Dense red oxide epoxy primer for metal surfaces.
• Excellent anti-corrosive performance with leafing pigments.
• Suitable for continuous immersion and high-rise structures.
• Low to semi-gloss finish.
• Can be applied by brush, roller, airless, or conventional spray.
• Touch dry in 2 hours, recoating possible overnight (brush/roller).
Available Sizes
| Pack Size |
| 500ml |
| 1 Litre |
| 4 Litre |
## Features##
## Specifications##
Specifications
| Colour | Red Oxide |
| Finish | Low to Semi-Gloss |
| Coverage | Up to 10 m² per mixed litre (depending on porosity/texture) |
| Drying Time | Touch dry in 2 hours |
| Recoating | Spraying – wet on wet; Brush/Roller – overnight |
| Pot Life | 8 hours at 20°C (4–6 hours at 25°C) |
| Mixing Ratio | 3 parts base : 1 part hardener by volume |
| Thinning | Spraying: 25–33⅓% Northane Spraying Thinners; Brush/Roller: 5% Norglass Epoxy Thinner |
| Weight/Litre | Varies by pack size |
| Volume Solids | 55% |
| Flash Point | 27°C (solvent) |
| Application | Mix base and hardener thoroughly, let stand 10 mins, then apply by brush, roller, airless, or conventional spray. |
| Clean Up | Norglass Epoxy Thinners or Northane Spraying Thinner |
| Hazard Classification | DG Class 3, HAZCHEM 3Y, P.G. III, UN 1263 |
| Precautions | Observe all polyamide cured product precautions. Provide ventilation, avoid naked flames, and do not smoke during use. Hardener is alkaline and may cause skin irritation. |
| First Aid | If swallowed, do not induce vomiting; give water or milk. Flush eyes for 15+ minutes if contact occurs. Wash skin thoroughly after contact. Move to fresh air if breathing difficulty arises; apply artificial respiration if needed. |
| Special Instructions | Avoid use below 10°C. Reseal hardener container immediately after partial use. Decant remaining contents into a smaller container if not used within 48 hours. |
## Specifications##
