Description
Norglass Paving Paint Slip Resistant Pewter
Norglass Paving Paint Slip Resistant in Pewter is a fast drying, low odour, hard-wearing polyurethane low gloss, low sheen finish with plastic granules incorporated into the coating for positive traction when wet. It can be applied directly to clean, dry, bare fibro, concrete or timber without priming, and is easily recoated. Ideal for external pavements, ramps, driveways, carports, hotels, offices, public buildings, schools, kindergartens, supermarkets, shopping centres, swimming pool surrounds, stairs, sporting facilities, change rooms, concourses, hospitals, aged care centres, mobility ramps, and many more.
Note: the colour sample indicated in the image is not an exact representation, and should be used as a guide only.
##features##
Features
- Slip Resistant: Conforms to NATA accredited slip resistant rating of P5.
- Durable Polyurethane: Hard-wearing, low sheen finish for long-lasting results.
- Direct Application: Can be applied to bare fibro, concrete, or timber without primer.
- Fast Drying: Touch dry in 2 hours at 20°C, light traffic after 16 hours.
- Excellent Coverage: 7–9 sqm per litre depending on surface preparation.
| Available Sizes |
| 1 Litre |
| 4 Litre |
| 10 Litre |
Colour Range
##features##
##Specification##
Specifications
| Property | Details |
| Colour | Pewter (part of 12 standard colours + Clear option) |
| Finish | Low Sheen |
| Coverage | 7–8 sqm per litre on untreated surfaces, 8–9 sqm per litre on sealed areas. Rough surfaces require more paint. |
| Drying Time | Touch dry in 2 hours at 20°C. Light traffic after 16 hours, full use after 24 hours. Vehicular traffic after 7 days. |
| Recoat Time | After 4 hours at 25°C |
| Thinning | Not normally recommended. For hot weather, 3–5% Weatherfast Brushing Thinner may be added. |
| Weight/Litre | 0.930 – 1.250 kg (depending on colour) |
| Volume Solids | 50% |
| Flash Point | 32°C |
| Cleanup | Weatherfast Brushing or Spraying Thinners |
| UN Number | 1263 |
| Transport | DG Class 3, HAZCHEM 3Y, P.G. III |
| Surface Preparation | Surfaces must be clean, dry, and free of grease or oil. Bare timber: Apply Norseal for water-prone areas, or Pri-Coat for smoother finish. Aluminium: Treat with Metal Etch Cleaner Gel and prime with Shipshape. Steel: Apply Norshield then Shipshape. Concrete: Acid wash with Norglass Concrete & Ceramic Cleaner, pressure clean, and dry before painting. Fibreglass: Prime with two coats of Shipshape. For previously painted surfaces, sand and clean before recoating. Not recommended over xylene-based coatings. |
| Application Method | Stir thoroughly before use to evenly disperse granules. Use synthetic brush for edges and short nap roller for large areas. Spray with HVLP using 25–30% Weatherfast Spraying Thinner if required. Apply evenly, maintaining a wet edge. Two coats required for coloured finishes, four for clear. |
| Precautions | Do not use below 10°C. Avoid smoking or flames nearby. On very dry concrete, an additional coat may be required. Not suitable for areas of constant immersion. Paint on flat exposed or poolside areas may fade faster due to UV and chlorine exposure. |
| First Aid | If swallowed, do not induce vomiting. Give water or milk. For eye contact, flush with water for 15 minutes and consult a doctor. For skin contact, wash thoroughly. If inhaled, move to fresh air. Seek medical help if symptoms persist. |
| Special Instructions | Thorough stirring is essential to evenly distribute plastic granules. Apply coats at right angles for uniform finish. For gradients steeper than 1:12, contact Norglass technical service before application. |
##Specification##
