Description
Shuttle Slide Rotating Trolling Motor Mount Bracket 9.5 for Instinct and Instinct Quest Models
This product is for Quest/Instinct series only and includes the QST-1 expander plate
This Patent Pending mount is CNC Machined from 1.0″ thick 6061-T6 aluminium. Additionally, it is Type III Hard Coat Anodized per MIL-A-8625 and comes with a lifetime warranty*. This model rotates fully with 4 locking positions at 0, 30, 60 and 90 degrees to allow you to pivot or swivel the motor into position. Fully compatible with your Minn Kota, Garmin, Rhodan, Power-Pole, Motorguide or any other trolling motor with up to 120 inch shaft length. If you want to use your standard quick release mount such as RTA-17, MKA-21, RTA-54, RTA-62, MKA-64, RTA-55, MKA-56, or Garmin versions, we have those hole patterns included already so you are all set! Quest series motors require QST-1 expander plate so please add that to your cart when ordering for those motors. With a built in, simple to use detent mechanism, simply pull the large pin and rotate the motor so the shaft clears the rub rail. Easy! The SS-9.5R is the most robust rotating mounting system available today.
Why choose SS-9.5R over the SS-7.5R?
- You want to reduce the amount of pressure on your deck (clear deck space required for a 9.5″ diameter circle)
Why choose a rotating mount?
- You have limited space to attach a trolling motor
- You want the trolling motor to sit off to the side and sit along the gunwale
- You want a clear view of the bow without the trolling motor obstructing your field of view
- ALL SS-9.5R mounts require 6 holes in your deck for proper attachment with first bolt within approximately 13 inches from edge of rub rail
- Uses all 3/8″ 316 Stainless hardware
- Optional Backing plate BKP-9.5R recommended if your have concerns about your deck
Quest Plate
Have a new Quest or Instinct? This mandatory plate is required to attach your motor to a SS-7.5R or SS-9.5R mount and is also compatible with RTA-55 or MKA-56 quick release mounts.
Material: CNC machined from 0.50″ thick 6061-T6 aluminum
Only Used for: Quest or Instinct trolling motors (NOT SOLD SEPARATELY)
## Specifications##
Specifications
| Specification | Size | Notes |
|---|---|---|
| Overall Size | 540 x 200 x 60 mm | L x W x H (at rotation point) |
| Deck Plate Footprint | 241 mm diameter | — |
| Center of Rotation (behind motor) | ~89 mm | — |
| Center of Rotation to Edge of Trolling Motor Shaft | ~438–464 mm | Range depending on shaft position |
| Rotation Pin | 114 mm diameter | — |
| Detent Pin | 10 mm diameter | Over 2,700 kg shear rating |
| Travel | 360° rotation | 4 detents at 0°, 30°, 60°, 90° |
| Trolling Motor Mounted Height | ~38 mm | From boat deck (mounting surface) |
| Bottom of Rotating Plate to Deck | ~17 mm | — |
| Rated Motor Weight (not thrust) | 54 kg | — |
| Rated Shaft Length | Up to 3.05 m | — |
Quest Plate
| Specification | Size |
|---|---|
| Length | 330 mm |
| Width | 238 mm |
| Plate Thickness | 13 mm |
| Material | 6061-T6 aluminium |
## Specifications##
