Shuttle Slide Rotating Trolling Motor Mount Bracket 9.5 for Instinct and Instinct Quest models

This product is for Quest/Instinct series only and includes the QST-1 expander plate

This Patent Pending mount is CNC Machined from 1.0″ thick 6061-T6 aluminium.  Additionally, it is Type III Hard Coat Anodized per MIL-A-8625 and comes with a lifetime warranty*.  This model rotates fully with 4 locking positions at 0, 30, 60 and 90 degrees to allow you to pivot or swivel the motor into position. Fully compatible with your Minn Kota, Garmin, Rhodan, Power-Pole, Motorguide or any other trolling motor with up to 120 inch shaft length. If you want to use your standard quick release mount such as RTA-17, MKA-21, RTA-54, RTA-62, MKA-64, RTA-55, MKA-56, or Garmin versions, we have those hole patterns included already so you are all set!  Quest series motors require QST-1 expander plate so please add that to your cart when ordering for those motors.  With a built in, simple to use detent mechanism, simply pull the large pin and rotate the motor so the shaft clears the rub rail.  Easy!   The SS-9.5R is the most robust rotating mounting system available today.

Why choose SS-9.5R over the SS-7.5R? 

• You want to reduce the amount of pressure on your deck (clear deck space required for a 9.5″ diameter circle)

Why choose a rotating mount?

• You have limited space to attach a trolling motor
• You want the trolling motor to sit off to the side and sit along the gunwale
• You want a clear view of the bow without the trolling motor obstructing your field of view
• ALL SS-9.5R  mounts require 6 holes in your deck for proper attachment with first bolt within approximately 13 inches from edge of rub rail
• Uses all 3/8″ 316 Stainless hardware
• Optional Backing plate BKP-9.5R recommended if your have concerns about your deck

Quest Plate

Have a new Quest or Instinct?  This mandatory plate is required to attach your motor to a SS-7.5R or SS-9.5R mount and is also compatible with RTA-55 or MKA-56 quick release mounts.

Material:  CNC machined from 0.50″ thick 6061-T6 aluminum

Only Used for:  Quest or Instinct trolling motors (NOT SOLD SEPARATELY)

## Specifications##

Specifications

• Deck Plate footprint:  9.5″ Diameter
• Center of rotation:  Approximately 3.5 inches behind rear of motor
• Center of rotation to edge of trolling motor shaft:  Approximately 17.25 to 18.25 inches
• Rotation Pin: 4.5″ Diameter
• Detent Pin: 10mm Diameter (Over 6,000 lb shear rating)
• Travel:  360 degrees, 4 detents at 0, 30, 60 and 90
• Trolling motor mounted height:  ~1.50 inches from mounting surface (Boat deck typically)
• Bottom of rotating plate to deck:  Approximately 0.675 inches
• Rated motor weight (NOT thrust): 120 lbs
• Rated shaft length:  UP TO 120 inches
• Installation Instructions (Preliminary!)
• Warranty:  Lifetime*

Quest Plate

• Length:  13.50″
• Width:  9.375″
• Plate thickness:  0.50″
• Material:  6061-T6

## Specifications##