Description
Blue Sea Safety Hub 150 Fuse Block
An ignition protected fuse block with screw termination safe for use on gasoline powered boats
- Accepts four AMI or MIDI Fuses for high-amp circuits up to 200A
- Accepts six ATO or ATC Fuses for circuits up to 30A including bilge pumps, electronics and lights
- Sealed cover protects fuses from the harsh marine environment and satisfies ABYC/USCG insulation requirements
- Negative bus provides common location for negative connection
- Circuit identification label with write-on capability
- Fuse puller easily removes ATO or ATC Fuses
- Cover provides storage space for two spare ATO or ATC and two spare AMI or MIDI fuses and mounting screws
- One-piece stainless flange nuts ensure safe and secure connections
- Fuses sold separately
##Specifications##
| Specifications | |
|---|---|
| Circuits | 10 |
| Stud Size | M8 x 1.25 |
| Operating Voltage | 12V 24V 32V |
| Amperage Maximum Operating - combined | 200A 350A 600A |
| Recommended Ring Terminal | M8 (5/16") |
| Screw Torque, 8-32 | 18in-lb (2.03 Nm) |
| Screw Torque, M5 | 27in-lb (3.05 Nm) |
| Stud Torque | 180 in-lb (20.34 Nm) |
| Weight | 3.50lb (1.59 kg |
Battery Management, Circuit Protection, and Switching Sub-System
The SafetyHub 150 consolidates ignition protected, high amperage and 24 hour circuit protection into one place near the battery while also providing circuit protection for the 360 Panel feed wire. The 360 Panel provides circuit protection for all medium amperage loads and the ST Blade Fuse Block protects the electronics, as these devices are switched on the device. This example minimizes panel space and consolidates circuit protection to only three places on the boat and achieves a critical safety advantage by ensuring all high amperage cables are protected.
##Specifications##
