Description
Norglass Metal-Etch Gel Cleaner
Norglass Metal-Etch Gel Cleaner is a phosphoric acid metal conditioner designed for pre-treatment of bare aluminium, galvanised iron, and non-ferrous alloys such as brass, copper, and bronze. It cleans and conditions metal surfaces to promote excellent paint adhesion. The viscous gel formulation holds well on vertical surfaces, and shaking or stirring temporarily liquefies it for easy application. Allowing the product to stand will revert it to gel form.
## Features##
Features
• Prepares bare metal surfaces for painting or clear lacquering.
• Promotes strong adhesion of paint or lacquer.
• Viscous gel prevents dripping on vertical surfaces.
• Easy application with brush, sponge, or soft broom.
• Non-flammable and non-combustible.
Available Sizes
| Pack Size |
| 1 Litre |
| 4 Litre |
## Features##
## Specifications##
Specifications
| Appearance | Pale yellow/green, odourless gel (liquifies if stirred or shaken) |
| Toxicity | Contains corrosive acid. Refer to Safety Directions and First Aid instructions |
| Finish | N/A |
| Coverage | Up to 14 m² per litre |
| Pot Life | N/A |
| Mixing Ratio | N/A |
| Thinning | Use as is; thinning not possible |
| Weight/Litre | 1 Litre, 4 Litre |
| Flash Point | N/A – Non-flammable, non-combustible |
| Application | Apply directly with brush, sponge, or soft nylon broom. Allow 15 mins contact, then rinse thoroughly with water. |
| Clean Up | Water |
| Hazard Classification | DG Class 8, HAZCHEM 2R, P.G III, UN 1805 |
| Special Instructions | Dry surface completely before priming. Avoid contamination and follow all safety recommendations. |
## Specifications##
