Description
Norglass Shipshape Primer-Undercoat White
Norglass Shipshape Primer-Undercoat is a densely pigmented 2-pack epoxy coating designed for excellent filling and adhesive properties. It produces a durable paint film with very good abrasion, chemical, and solvent resistance. Ideal as a primer or undercoat for timber, fibreglass, aluminium, concrete, and over Norglass Norshield Anti-Corrosive Primer on steel, it provides a reliable base for Northane topcoats.
## Features##
Features
• Densely pigmented 2-pack epoxy coating.
• Excellent adhesion and surface filling.
• High resistance to abrasion, chemicals, and solvents.
• Suitable for timber, fibreglass, aluminium, concrete, and steel.
• Low to semi-gloss finish.
• Available in White and Grey.
• Can be applied by brush, roller, or spray.
Available Sizes
| Pack Size |
| 500ml |
| 1 Litre |
| 2 Litre |
| 4 Litre |
| 10 Litre |
## Features##
## Specifications##
Specifications
| Colours | White and Grey |
| Finish | Low to Semi-Gloss |
| Coverage | Up to 10 m² per mixed litre (subject to porosity/texture) |
| Drying Time | Touch dry in 2 hours at 20°C |
| Recoating | Spraying – wet on wet; Brush/Roller – overnight |
| Pot Life | Approx. 8 hours at 20°C |
| Mixing Ratio | 3 parts base : 1 part hardener by volume |
| Thinning | Spraying: 25–33⅓% Northane Spraying Thinners; Brush/Roller: up to 10% Norglass Epoxy Thinner |
| Weight/Litre | 1.51 kg when mixed |
| Volume Solids | 55% |
| Flash Point | 27°C (solvent) |
| Application | Mix base and hardener thoroughly, allow 10 minutes induction. Apply by brush, roller, or spray. Multiple coats can be applied on the same day. Light sanding recommended for smooth finish. |
| Clean Up | Norglass Epoxy Thinner or Northane Spraying Thinners |
| Hazard Classification | DG 3, HAZCHEM 3Y, P.G. III, UN 1263 |
| Precautions | Polyamide cured. Provide ventilation, avoid naked flames, and do not smoke during use. Hardener may cause skin irritation. Avoid use below 10°C. |
| First Aid | If swallowed, do not induce vomiting; give water or milk. Flush eyes for at least 15 minutes if contact occurs. Wash skin thoroughly after contact. Move to fresh air if breathing difficulty arises; apply artificial respiration if needed. |
| Special Instructions | Reseal containers immediately after partial use. Decant remaining contents into smaller container within 48 hours to minimize air exposure. |
## Specifications##
