Raymarine RSW-Wired Performance Wind with 30m Cable

Elevate Your Sailing Experience with the RSW Wired Smart Wind Transducer!

Experience professional-level wind sensing with our RSW Wired Smart Wind Transducer, designed to provide highly accurate calibrated wind speed and direction data for optimal navigation and performance on the water.

Features

• Expert Accuracy, Effortlessly: With Raymarine Smart Wind technology, installation is a breeze – simply install and go! Enjoy expert-level accuracy without the need for additional processors or extensive calibration, saving you time and money.
• Fine-Tuned Precision: Each transducer undergoes rigorous wind tunnel testing to ensure precise and consistent data. Our finely tuned instrument is balanced to deliver accurate readings from the masthead, empowering you with reliable wind information for informed decision-making.
• Sail Smarter: Trust in our high-accuracy True Wind data, combined with Alpha Performance Displays and Axiom Chartplotters, to sail smarter. Make informed navigational decisions and optimize your sailing performance with confidence.
• Ready to Sail: Supplied with a 30m Smart Wind mast cable as standard, our transducer is ready to install and use right out of the box. Enjoy seamless integration into your existing setup and start harnessing the power of accurate wind data immediately.

## Specifications##

Specifications

Physical

Length

• Wind transducer (including cable): 657.762 mm (25.90 in)
• Wind transducer (excluding cable): 540.712 mm (21.29 in)
• Wired gateway: 155.61 mm (6.13 in)

Width     

• Wind transducer: 46.96 mm (1.85 in)
• Wired gateway: 47.38 mm (1.88 in)

Height

• Wind transducer: 305.86 mm (12.04 in)
• Wired gateway: 30.61 mm (1.21 in)

Power

• Nominal supply voltage: 12 V dc (via SeaTalk NG)
  
• Operating voltage range: 9 V to 16 V dc
  
• Power Consumption: < 100 mW
  
• Fuse rating: Ensure that the SeaTalk NG backbone is protected by a 5 A fuse
  
• NMEA 2000 LEN (Load Equivalency Number) - based on nominal 9 V rating: 1

Environmental

• Operating temperature range: -25°C to +55°C
  
• Storage temperature range: -30°C to +70°C
  
• Relative humidity: Masthead: 100%. / Below deck: up to 93% @ 40°C
  
• Waterproof rating: Wind transducer: IPx7 / Wired gateway: IPx6
  
• Wind: 115 mph (185 kph)
  
• Vibration: EN 60945:2002 (exposed)
  

Conformance

• Europe, Australia & New Zealand: EN 60945:2002

## Specifications##

## In the Box##

What's in the box?

The following parts are supplied with the RSW-Wired.

1. No.10 x 3/4" self tapping screws x 4 (for mounting the wind transducer)
2. No.7 x 3/4" self tapping screws x 2 (for mounting the gateway)
3. 40 mm (1.57 in) heat shrink tube (required to insulate ground wire when shortening the mast cable)
4. Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a metal surface)
5. Mast cable, 30 m (98.43 ft) reel
6. Documentation
7. Wind transducer
8. Smart wind wired gateway
9. SeaTalk NG to DeviceNet adaptor cable, 120 mm (4.72 in)

## In the Box##