Description
Norglass Paving Paint Smooth Ivory
Norglass Paving Paint Smooth Ivory is a fast-drying, low-odour, hard-wearing polyurethane with a low-sheen finish. The coating provides a smooth, durable surface suitable for external pavements, driveways, ramps, pool surrounds, schools, sporting facilities, hospitals, aged care centres, and more. It is easy to apply and recoatable, delivering both aesthetic appeal and long-lasting performance.
##features##
Features & Benefits
- Smooth Finish: Low-sheen polyurethane for a clean, uniform appearance.
- Durable Polyurethane: Hard-wearing and long-lasting for high-traffic areas.
- Low Odour: Suitable for residential and commercial applications.
- Quick Drying: Touch dry in 2 hours; light traffic after 16 hours; normal use after 24 hours.
- Excellent Coverage: 7–9 sqm per litre depending on surface preparation.
- Easy Application: Brush (edges), short nap (4mm) roller, or HVLP spray.
- Direct to Surface: Can be applied to clean, dry, bare fibro, concrete, or timber without priming.
- Versatile Uses: Driveways, ramps, pool surrounds, schools, hospitals, sporting facilities, and more.
| Available Sizes |
| 1 Litre |
| 4 Litre |
| 10 Litre |
Colours Available
##features##
##Specification##
Specifications
| Property | Details |
| Finish | Low-sheen |
| Coverage | 7–8 sqm/L on untreated smooth surfaces; 8–9 sqm/L on sealed smooth areas. Rough surfaces require more paint. |
| Application Method | Brush (edges), 4mm nylon/mohair roller, or HVLP spray (2.8–3.0mm tip, 25–30% thinner, 55–65 psi). |
| Drying Time | Touch dry: 2 hours at 20°C, 50% RH. Light traffic after 16 hours; normal use after 24 hours; vehicular traffic after 7 days. |
| Recoat Time | After 4 hours at 25°C |
| Thinning | Not normally required; in hot weather use 3–5% Weatherfast Brushing Thinner. |
| Weight/Litre | 0.930 – 1.250 kg (depending on colour) |
| Volume Solids | 50% |
| Flash Point | 32°C |
| Cleanup | Weatherfast Brushing Thinner or Weatherfast Spraying Thinner |
| UN Number | 1263 |
| Transport | DG Class 3, HAZCHEM 3Y, P.G. III |
| Suitable Surfaces | Fibro, concrete, timber, aluminium, steel, fibreglass (with correct preparation and primers). |
| Preparation | Surfaces must be clean, dry, and free of grease/oil. Specific primers required for steel, aluminium, and fibreglass. Acid wash and prime concrete as needed. Sand/clean previously painted surfaces before recoating. Not suitable for tiled surfaces. |
| Precautions | Provide ventilation. Do not smoke or expose to flames. Not for areas of constant immersion. Avoid application below 10°C. Thorough stirring required. |
| Exposure | Flat exposed areas fade faster due to UV and pollutants. Pool surrounds may require more frequent recoating due to chlorine bleaching. |
| First Aid | If swallowed, call doctor/Poison Centre. Do not induce vomiting. Flush eyes/skin with water 15 minutes. Remove to fresh air if inhaled. Apply artificial respiration if needed. |
| Special Instructions | Coloured paint requires 2 coats. Clear paint requires 4 coats (plus 2 additional within 6 months). Apply subsequent coats at 90° angle to previous. On very dry concrete, a 3rd coat may be needed. |
##Specification##
