Description
Norglass Smooth Paving Paint Pewter
Norglass Smooth Paving Paint Pewter is a fast-drying, low-odour, hard-wearing polyurethane with a low-sheen finish. The coating incorporates plastic granules for positive traction when wet, making it ideal for high-traffic areas. Suitable for external pavements, driveways, ramps, pool surrounds, schools, sporting facilities, and more, it provides durability, safety, and easy recoating.
##features##
Features & Benefits
- Slip-Resistant: Plastic granules incorporated for enhanced traction when wet.
- Durable Polyurethane: Hard-wearing low-sheen finish for high-traffic areas.
- Low Odour: Suitable for both residential and commercial use.
- Quick Drying: Touch dry in 2 hours; light traffic after 16 hours; normal use after 24 hours.
- Excellent Coverage: 7–9 sqm per litre depending on surface preparation.
- Easy Application: Brush (edges), short nap (4mm) roller, or HVLP spray.
- Direct to Surface: Can be applied to clean, dry, bare fibro, concrete, or timber without priming.
- Versatile Uses: Driveways, ramps, pool surrounds, schools, hospitals, sporting facilities, and more.
| Available Sizes |
| 1 Litre |
| 4 Litre |
| 10 Litre |
Colours Availables
##features##
##Specification##
Specifications
| Property | Details |
| Finish | Low-sheen |
| Coverage | 7–8 sqm/L on untreated smooth surfaces; 8–9 sqm/L on sealed smooth areas. Rough surfaces require more paint. |
| Application Method | Brush (edges), 4mm nylon/mohair roller, or HVLP spray (2.8–3.0mm tip, 25–30% thinner, 55–65 psi). |
| Drying Time | Touch dry: 2 hours at 20°C, 50% RH. Light traffic after 16 hours; normal use after 24 hours; vehicular traffic after 7 days. |
| Recoat Time | After 4 hours at 25°C |
| Thinning | Not normally required; in hot weather use 3–5% Weatherfast Brushing Thinner. |
| Weight/Litre | 0.930 – 1.250 kg (depending on colour) |
| Volume Solids | 50% |
| Flash Point | 32°C |
| Cleanup | Weatherfast Brushing Thinner or Weatherfast Spraying Thinner |
| UN Number | 1263 |
| Transport | DG Class 3, HAZCHEM 3Y, P.G. III |
| Suitable Surfaces | Fibro, concrete, timber, aluminium, steel, fibreglass (with correct preparation and primers). |
| Preparation | Surfaces must be clean, dry, and free of grease/oil. Specific primers required for steel, aluminium, and fibreglass. Acid wash and prime concrete as needed. Sand/clean previously painted surfaces before recoating. Not suitable for tiled surfaces. |
| Precautions | Provide ventilation. Do not smoke or expose to flames. Not for areas of constant immersion. Avoid application below 10°C. Thorough stirring required to disperse granules. Steep gradients (>1:12) require technical consultation. |
| Exposure | Flat exposed areas fade faster due to UV and pollutants. Pool surrounds may require more frequent recoating due to chlorine bleaching. |
| First Aid | If swallowed, call doctor/Poison Centre. Do not induce vomiting. Flush eyes/skin with water 15 minutes. Remove to fresh air if inhaled. Apply artificial respiration if needed. |
| Special Instructions | Coloured paint requires 2 coats. Clear paint requires 4 coats (plus 2 additional within 6 months). Apply subsequent coats at 90° angle to previous. On very dry concrete, a 3rd coat may be needed. |
##Specification##
